BT40 Shrink Fit Tool Holders Shrink Fit chuck

  • BT40 shrink fit tool holder
  • Works on all BT40 machines
  • From 3mm to 25mm
  • All critical surfaces precision ground
  • Made from alloy steel hardened to 54 – 56rc
  • Balanced to G2.5 at 25,000 RPMs
  • Gage length is ( from 0.5″ to 10 inches)
  • Concentricity is less than .0001 at collet face
  • Rear thread for pull stud is M16x2
  • Color Silver Coated: never rusty ever
Inquiry Now
Category:

Description

               BT40 Shrink Fit Tool Holders Shrink Fit chuck

                           

Why choose to shrink Fit tool holders  
1. Achieved using an inexpensive hot air heater
2  Hot loading and unloading operation
3, Can be safely immersed in cooling
4, No matter the placement, there will be no overheating with a wall thickness of 1.5mm
5, Ultra-thin apex part and abundant shape change
6. Hot refilling of φ3/32 ~ 1" can be performed without replacing the heating nozzle.
7. High rigidity-shortest tool protrusion
8. Hot-fitting tool holders do not require a nut and collet for holding the tool with a collet holder. It is an integrated type consisting of only the main body.
Half angle 3 °, wall thickness 1.5mm is a very light and slender shape, try to avoid interference with the workpiece.
Since the protruding length of the tool can be set to the shortest, high rigidity, strong and stable cutting can be performed without flutter, and a high-quality machined surface is obtained. 
And we guarantee that we can dramatically increase the tool life.High accuracy = extended tool life
 
There are no parts (nuts, collets, etc.), which can be accurate regardless of proficiency, Installation with high accuracy

Because there is no need to adjust the clamping degree, anyone can install the tools with high precision ,high-precision clamping will be extend the tool long life time
Clamping tools more than 2,000 times.


 

We Accept Custom OEM Order 

        BT40  Shrink Fit Tool Holders

BT40 Product NO. BT40 Shrink Fit Tool Holder
Insulation material Hardened Alloy Steel
Hardness HRC 55
Run Out (TIR) <0.0001″ or 0.003mm
Color Silver Coated
 Standard Spindle  BT40 Taper
Stop Screw Threaded for internal stop screw included
Manufacture IGSTOOL

 

BT Taper Application Guide

 

BT40 Shrink Fit Tool Holder Available

Each shrink fit tool holder made in the standard of G2.5 25,000 rpm.

        For the shrink fit tool holder hole with h6 tolerance, Using HA to DIN6535 and Form A to DIN 1835-1, 

 

 

 

Go to Top