CAT40 Blank Tool Holder 12″ Long Gage Tool

  • CAT40 Blank Tool Holder 12″ Long Gage Tool
  • Works on all CAT 40 machines
  • Gage length: 12 inches
  • Gage diameter: 2 inches
  • All critical surfaces precision ground
  • Made from alloy steel hardened to 54 – 56rc
  • Balanced to G2.5 at 15,000 RPMs
  • Rear thread for pull stud is 5/8-11
  • Color: Silver
Inquiry Now
Category:

Description

CAT40 Blank Tool Holder 12″ Long Gage Tool

The IGSTOOL Face Mill Tool holder is balanced to G2.5 15,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders  in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish

 

We accept Custom OEM Order 

Specification

      CAT40 Tool Probe Calibrator Calibration Gage Tool CAT40 Blank Tool Holder 

CAT40 Working Spindle  CAT40
Insulation material Hardened Alloy Steel
Gage Length 12 inches  Tolerance +- 0.0003  or 0.01mm
Probe diameter o.5  +- 0.0002 or 0.005mm
Color Silver
 Standard Spindle  CAT40 Taper
Run out 0.0001 or 0.003mm
Manufacture Part No IGST0106

 

 

                                                                              Application Guide CAT Spidle Size

 

 

 

                      CAT40 Blank Tool Holder 12″ Long Gage Tool

 

                                                  it can be kept in tool changer for periodic probe calibration and can be used to calibrate your table tool probe 

 

 

IGSTOOL built in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made  er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision.We also provide er collet set ,drill collet,5c collet set and r8 collet set ,our er collet precision
match techniks collet and lyndex collets. otherwise, we accept OEM tool collet and router collet ,lathe collet chuck and 16c collet too.

Go to Top