- BT30 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT30 machines
- For ER40 ER32 ER25 ER20 ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color Silver Coated: never rusty ever
-
-
- BT30 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT30 machines
- For ER40 ER32 ER25 ER20 ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
-
- BT30 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT30 machines
- For ER40 ER32 ER25 ER20 ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
-
- BT30 Face Mill Tool Holder
- Works on all BT30 machines
- From 20mm to 50mm
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Screw include
- Rear thread for pull stud is M12X1.75
- Color: oxide black
-
- BT30 shrink fit tool holder
- Works on all BT30 machines
- From 3mm to 12mm
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 10 inches)
- Concentricity is less than .0001 at collet face
- Rear thread for pull stud is M12 x 1.75
- Color Silver Coated: never rusty ever
-
- BT30 Side Lock End Mill Tool Holder
- Works on all BT30 machines
- From 3mm to 25mm
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
-
- BT30 SK Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT30 machines
- For SK25 SK20 SK16 Sk10 and SK6
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color: Silver
-
- BT30 Side Lock End Mill Tool Holder
- Works on all BT30 machines
- From 3mm to 25mm
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
-
- BT30 probe OMP40 tool holder
- Works on all BT30 machines
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- The rear thread for pull stud is 5/8-11
- Color: Silver
-
- BT30 Tool Holder Tightening Fixture
- Holds all standard BT30
- Made from alloy steel hardened to 54 - 56rc
- Made in alloy steel
- The internal taper is aluminum to avoid scratching your tool holder taper
- Great fixture for tightening your tool holders and pull stud
-
- BT30 Tool Probe Calibrator Calibration Gage Tool
- Works on all BT30 machines
- Gage length: 4inches
- Gage diameter: 0.5 inches
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- The rear thread for the pull stud is M12x1.75
- Color: Oxide Black
-
Heavy Duty CAT40, BT40 CAT50 HSK63 tool holder cart, and storage Made in alloy steel with heavy-duty printed Max 36pcs tool holder rack in BT40 /CAT40 ,20pcs for CAT50