Skip to content
-
- ER25 Straight Shank Tool Holders with flat
- Shank length: up to 8inches with Flat
- Shank length diameter up to 32mm or 1.5"
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
-
- ER32 Straight Shank Tool Holders with Flat
- Shank length: up to 8 inches
- Shank length diameter up to 42mm or 2"
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: Yes
- Color: Oxide black
-
- ER32 Straight Shank Tool Holders with
- Shank length: up to 8inches
- Shank length diameter up to 42mm or 2"
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
-
- ER40 Straight Shank Tool Holders
- Shank length: up to 8inches
- Shank length diameter up to 42mm or 2"
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
-
- ER40 Straight Shank Tool Holders
- Shank length: up to 8inches
- Shank length diameter up to 42mm or 2"
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
-
- Straight Shank 3/4 ER16 Floating Tap Tool Holder Tapping Chuck
- For ER20 and ER16
- Shank available. 3/4 ,1",16mm 20mm
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Collet nut is included
- Color: oxide and anodizing
-
- Straight Shank Floating Tap Tool Holder Tapping Chuck
- Works on all CAT 40 machines
- For ER20 and ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is 4 inches
- Collet nut is included
- Rear thread for pull stud is 5/8-11
- Color: oxide and anodizing
-
- Straight Shank Extension Shrink Fit Tool Holder
- Works on all extension machine
- 1/8,1/4,3/8,1/2, 5/8,3/4, and 1" available
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 10 inches)
- Concentricity is less than .0001 at collet face
- Color Silver Coated: never rusty ever
-
- ER20Straight Shank Tool Holders Mini Nut
- Shank length: 8inches
- Shank length diameter up to 32mm
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
-
- Custom ER Straight Shank TTS3/4 ER Tool Holders
- Shank length: 1.38"
- Flange size:1.5“
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
