- BT30 Tool Probe Calibrator Calibration Gage Tool
- Works on all BT30 machines
- Gage length: 4inches
- Gage diameter: 0.5 inches
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- The rear thread for the pull stud is M12x1.75
- Color: Oxide Black
BT30 Tool Probe Calibrator Calibration Gage Tool
Description
BT30 Tool Probe Calibrator Calibration Gage Tool
The IGSTOOL Face Mill Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holder in the high-performance
A balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish
We accept Custom OEM Order
Specification
BT30 Tool Probe Calibrator Calibration Gage Tool |
||
|---|---|---|
| BT30 | Working Spindle | BT30 |
| Insulation material | Hardened Alloy Steel | |
| Gage Length | 5 inches Tolerance +- 0.0003 or 0.01mm | |
| Probe diameter | o.5 +- 0.0002 or 0.005mm | |
| Color | Oxide and anodizing | |
| Standard Spindle | BT30 Taper | |
| Run out | 0.0001 or 0.003mm | |
| Manufacturer Part No |
|
|
Application Guide BT Spidle Size
What is a probe calibrator tool holder
it can be kept in a tool changer for periodic probe calibration and can be used to calibrate your table tool probe
