Selected Materials & Heat Treatment

Home|KNOWLEDGES|Selected Materials & Heat Treatment
19 01, 2016

CAT SHRINK FIT TOOL HOLDER

2020-08-14T20:32:07+00:00January 19th, 2016|Categories: Alloy Steel, KNOWLEDGES|Tags: , |

The shrink fit tool holder is a hot-loading system that uses a difference between the thermal expansion coefficients of the tool holder (special stainless steel)and the tool (hard alloy) to clamp the tool strongly and with high precision. The shank material uses special stainless steel for hot-packing with a large thermal expansion coefficient, which

19 01, 2016

Carbon Steel

2020-02-10T06:07:51+00:00January 19th, 2016|Categories: Carbon Steel|Tags: |

Carbon steel is an iron-carbon alloy with a carbon content of 0.0218% to 2.11%. Also called carbon steel. Generally also contains a small amount of silicon, manganese, sulfur, phosphorus. Generally, the higher the carbon content in carbon steel, the greater the hardness and the higher the strength, but the lower the ductility.

19 01, 2016

SUJ2 High Canbon Steel

2020-02-10T06:16:18+00:00January 19th, 2016|Categories: SUJ2|Tags: , |

SUJ2 JIS high carbon chromium bearing steel, this product uses Japanese SUJ2 bearing special steel full hard place HRC58-61 with bearing abrasion resistance and enhanced thimble steel workability. Characteristics The flat tip can be directly processed and molded using a mold that is 2-3 times higher than SKD-61 (HRC52) full

Go to Top