- BT30 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT30 machines
- For ER40 ER32 ER25 ER20 ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5″ to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
BT30 ER Collet Chuck Tool Holders UM Nut Silver Coated
Description
BT30 ER Collet Chuck Tool Holders CNC Milling Tools Silver Coated
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
Specification
Collet Chuck Tool Holder |
||
|---|---|---|
| BT30 | Product NO. | ER40 ER32 ER25 ER20 ER16 eR11 and ER8 |
| Insulation material | Hardened Alloy Steel | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0001″ or 0.003mm | |
| Color | Silver Coated | |
| Standard Spindle | BT30 Taper | |
| Stop Screw | Threaded for internal stop screw included | |
| Manufacture | IGSTOOL | |
The tool holder surface is coated by nickel
BT30 Taper Application Guide
BT30 Collet Holders Available
IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision .We also provide er collet set ,drill collet,5c collet set and r8 collet set ,our er collet precision
match techniks collet and lyndex collets. otherwise we accept OEM tool collet and router collet ,lathe collet chuck and 16c collet too.
