BT30 ER Collet Chuck Tool Holders UM Nut Silver Coated

Home|CNC MACHINE TOOLS|Tool Holders|BT30 Tool Holders|BT30 ER Collet Chuck Tool Holders UM Nut Silver Coated

BT30 ER Collet Chuck Tool Holders UM Nut Silver Coated

  • BT30 ER Collet Chuck Tool Holders CNC Milling Tools
  • Works on all  BT30 machines
  • For ER40 ER32 ER25 ER20 ER16
  • Threaded for stop screw ( included)
  • All critical surfaces precision ground
  • Made from alloy steel hardened to 54 – 56rc
  • Balanced to G2.5 at 25,000 RPMs
  • Gage length is ( from 0.5″ to 8 inches)
  • Concentricity is less than .0001 at collet face
  • Round Collet nut is included
  • Rear thread for pull stud is M12X1.75
  • Color:oxide black
Category:

Description

  BT30 ER Collet Chuck Tool Holders CNC Milling Tools Silver Coated

The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders  in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time  and greatly improve surface finish

 

We accept Custom OEM Order 

Specification

    Collet Chuck  Tool Holder

BT30 Product NO.   ER40 ER32 ER25 ER20 ER16 eR11 and ER8
Insulation material Hardened Alloy Steel
Hardness HRC 55
Run Out (TIR) <0.0001″ or 0.003mm
Color Silver Coated
 Standard Spindle  BT30 Taper
Stop Screw Threaded for internal stop screw included
Manufacture IGSTOOL

The tool holder surface is coated by nickel

BT30 Taper Application Guide

 

 

BT30 Collet Holders Available

 

 

IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made  er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision .We also provide er collet set ,drill collet,5c collet set and r8 collet set ,our er collet precision
match techniks collet and lyndex collets. otherwise we accept OEM tool collet and router collet ,lathe collet chuck and 16c collet too.