- BT40 Probe gauge tool holder
- Works on all BT40 machines
- All critical surface grinding ground
- Gage diameter: 1.75″
- Made from stainless steel hardened to 54 – 56rc
- The rear thread for the pull stud is M16x2.0
BT40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL
Description
BT40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL
The IGSTOOL Face Mill Tool holder is balanced to G2.5 15,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish
We accept Custom OEM Order
Specification
BT40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL |
||
|---|---|---|
| BT40 | Working Spindle | BT40 |
| Insulation material | Hardened Alloy Stainless Steel | |
| Gage Length | 1.35″ | |
| Probe Mounting Hole | 0.790″ x 1.05 ” deep | |
| Nose Diameter | 1.75″ | |
| Standard Spindle | BT40 Taper / rear thread :M16 x2.0″ | |
| Run out | 0.0002 or 0.005mm | |
| Manufacturer Part No | IGSB40OMP60 | |
Application Guide BT Spidle Size
Tool Holder Probe Gauge Tool
it can be kept in a tool changer for periodic probe calibration and can be used to calibrate your table tool probe
IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision. We also provide er collet set, drill collet,5c collet set and r8 collet set,probe gauge tool, our er collet precision
match techniks collet and index collets. otherwise, we accept OEM tool collet and router collet , lathe collet chuck, and 16c collet too.
