BT40 Tool Probe Calibrator Calibration Gage Tool

  • BT40 Tool Probe Calibrator Calibration Gage Tool
  • Works on all BT 40 machines
  • Gage length: 4inches
  • Gage diameter: 0.5 inches
  • All critical surfaces precision ground
  • Made from alloy steel hardened to 54 – 56rc
  • The rear thread for the pull stud is M16x2.0
  • Color: Oxide  Black
Inquiry Now
Category:

Description

BT40 Tool Probe Calibrator Calibration Gage Tool

The IGSTOOL Face Mill Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holder in the high-performance
A balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish

 

We accept Custom OEM Order 

Specification

      BT40 Tool Probe Calibrator Calibration Gage Tool

BT40 Working Spindle  BT40
Insulation material Hardened Alloy Steel
Gage Length 5 inches  Tolerance +- 0.0003  or 0.01mm
Probe diameter o.5  +- 0.0002 or 0.005mm
Color Oxide and anodizing
 Standard Spindle  BT40 Taper
Run out 0.0001 or 0.003mm
Manufacturer Part No
IGSC-8103

                                                                              Application Guide BT Spidle Size

                       What is a probe calibrator tool holder  

 

                                                  it can be kept in a tool changer for periodic probe calibration and can be used to calibrate your table tool probe 

Go to Top