- CAT40 probe OMP60 tool holder
- Works on all CAT 40 machines
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- The rear thread for pull stud is 5/8-11
- Color: Silver
CAT40 Tool Holder OMP60 Probe Gauge Tool
Description
CAT40 Tool Holder OMP60 Probe Gauge Tool
The IGSTOOL Face Mill Tool holder is balanced to G2.5 15,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holder in the high-performance
A balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish
We accept Custom OEM Order
Specification
CAT40 OMP60 Tool Probe Gauge tool |
||
|---|---|---|
| CAT40 | Working Spindle | CAT40 |
| Insulation material | Hardened Stainless Alloy Steel | |
| Gage Length | 1.35″ | |
| Probe Mounting hole | 0.790 x 1.05″ deep | |
| Nose Diameter | 1.75″ | |
| Standard Spindle | CAT40 Taper | |
| Run out | 0.0001 or 0.003mm | |
| Manufacturer Part No | IGS-CATOMP60 | |
Application Guide CAT Spidle Size
Tool Holder OMP40/60 Probe Gauge Tool
it can be kept in a tool changer for periodic probe calibration and can be used to calibrate your table tool probe
IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision. We also provide er collet set, drill collet,5c collet set, and r8 collet set omp60 probe tool holder, our er collet precision
match techniks collet and lyndex collets. otherwise, we accept OEM tool collet and router collet, lathe collet chuck, and 16c collet too.
