- CAT50 End Mill Tool Holders CNC Milling Tools
- Works on all CAT 50 machines
- For 1/4,3/8,1/2,3/4,1″ 1.5″ and 2″
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 2″ to 10 inches)
- Concentricity is less than .0001 at collet face
- Collet nut is included
- Rear thread for pull stud is 1-8″
- Color Silver Coated: never rusty ever
CAT50 End Mill Tool Holders CNC Machine Tools
Description
CAT50 End Mill Tool Holders CNC Milling Tools
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life cycle and greatly improve surface finish
We accept Custom OEM Order
Specification
All CAT50 End Mill Tool Holder |
||
|---|---|---|
| CAT50 | Product NO. | CAT50 End Mill Tool Holder 1/4, 3/8,1/2,,3/4, 1.5 and 2.0 available |
| Insulation material | Hardened Alloy Steel | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0001″ or 0.003mm | |
| Color | Silver coated (never rusty ever) | |
| Standard Spindle | CAT50 Taper | |
| Hole | Internal hole tolerance: H5(DIN-1835-B standard) | |
| Manufacture | IGSTOOL | |
Application Guide
CAT50 End Mill Tool Holders Available
Inquiry us immediately
