- Custom ER Straight Shank
- Shank length: up to 10 inches
- Shank length diameter up to 42mm or 2″
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 250mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Color: Oxide black and silver-coated option
Custom ER Straight Shank Tool Holders Cylindrical Collet Holders
Description
Custom Straight Shank Tool Holders Collet Holders FLat
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
Custom Straight Shank Tool Holders FLat |
||
|---|---|---|
| Shank | Shank Size available | Customer request |
| Shank length available | Customer request | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0002″ or 0.005mm | |
| Color | Oxide black/ silver coated | |
| Shank | UM Nut | |
| Shank With Flat | Yes (option) | |
| Manufacture | IGSTOOL | |
All straight shank tool holder can be used on lathe and milling machine
Ths shank has flat or without flat options, collet nut has round and hexagon nut, the shank length can be up to 200mm and
precision run out 0.005mm, used on the small hole, step cutting, and space milling
According to the customer,s drawing
Please email to sales@igstool.com with detail drawing in any kinds format（such as JPG，PDF，IGS，STEP，CORE, ETC)
