- ER16 Straight Shank Tool Holders Mini Nut
- Shank length: 8inches
- Shank length diameter up to 32mm
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
ER16 Straight Shank Tool Holders Cylindrical Shank Collet Holder Mini Nut
Description
ER16 Straight Shank Tool Holders Mini Nut
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
ER16 Straight Shank Tool Holders Mini Nut |
||
|---|---|---|
| ER16 | Shank Size available | 3/8,1/2,3/4, 1″ 1.25″ 1.5″ / 8 10 12 16 20 25 32mm |
| Shank length available | 1″ 2″ 4″ 6″ 8″ | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0002″ or 0.005mm | |
| Color | Oxide black | |
| ER16 Type | Mini Nut | |
| Balance | G2.5 25,000 rpm | |
| Manufacture | IGSTOOL | |
All straight shank tool holder can be used on lathe and milling machine
Ths shank has flat or without flat options, collet nut has round and hexagon nut, the shank length can be up to 200mm and
precision run out 0.005mm, used on the small hole, step cutting, and space milling
ER16 straight shank tool holder available
