High Precision Micro Boring Head Range 20-250mm

Home|Indexable Tooling|Boring Head Set|High Precision Micro Boring Head Range 20-250mm

High Precision Micro Boring Head Range 20-250mm

  • Micro boring head
  • High precision 0.005mm increase
  • For hole and face grooving
  • All critical surfaces precision ground
  • Made from alloy steel hardened to 54 – 56rc
  • Gage length is from 10mm to 500mm available
  • Concentricity is less than .0002 at collet face
Inquiry Now
Category:

Description

High Precision Micro Boring Head Range

The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders  in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time  and greatly improve surface finish

We accept Custom OEM Order 

High Precision Micro Boring Head Range

Boring Head Boring Head Boring Range  16-250mm ( 3/4-8″)
Boring Face Groove  16-200mm ( 3/4-7″)
Adjustment  0.005mm increase
Run Out (TIR) <0.0002″ or 0.005mm
Color Silver coated
Boring Depth max500mm
Shank Arbor Accept  LBK1 to LBK6
Manufacture IGSTOOL

 

All boring head tool holder can be used on the lathe and milling grinding machine 

precision run out 0.005mm, adjustment 0.005mm increase boring 

 

     

IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made  er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 boring head  etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision .We also provide er collet set ,drill collet,5c collet set and r8 collet set ,our er collet precision
match techniks collet and lyndex collets. otherwise we accept OEM tool collet and router collet ,lathe collet chuck and 16c collet too.

Go to Top