- BT30 Side Lock End Mill Tool Holder
- Works on all BT30 machines
- From 3mm to 25mm
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5″ to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M12X1.75
- Color:oxide black
High Precision Slim Fit Collets
Description
High Precision Slim Fit Collets BT30 Slim Fit Collet Chuck Tool Holder
The collet holder without no collet nut designed .could be milling deep hole cutting, interference head diameter deeping hole milling
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
Specification
Slim fit collets |
||
---|---|---|
SPEC | Size available | SLC12 and SLC06 ,Clamping Range : 12mm |
Insulation material | Hardened Alloy Steel | |
Hardness | HRC 48 | |
Run Out (TIR) | <0.0002″ or 0.005mm | |
Color | Oxide Black | |
Stop Screw | yes | |
Manufacture | IGSTOOL |
The slim fit tool holder designed without collet nut
It,s a good idea for deep hole machining, avoid interference cutting down
High precision slim fit collet
Related Tool Holder
IGSTOOL built-in 2006,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision. We also provide er collet set, drill collet,5c collet set and r8 collet set , our er collet precision
match techniks collet and lyndex collets. otherwise we accept OEM tool collet and router collet,lathe collet chuck and 16c collet too.