- Custom ER Straight Shank TTS3/4 ER Tool Holders
- Shank length: 1.38″
- Flange size:1.5“
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
TTS3/4 ER Tool Holders Collet Chuck For Tormach
Description
Custom ER16 Straight Shank Tool Holders Cylindrical Collet Holders TTS er16 Tool Holders
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
ER Straight Shank TTS ER16 Tool Holders |
||
|---|---|---|
| ER | Shank Size available | 3/4″ |
| Shank length available | 1.38″ | |
| Flange Size | 1.5″ | |
| Run Out (TIR) | <0.0002″ or 0.005mm | |
| Color | Oxide black | |
| For ER Collet | ER11 ER20 ER25 eR32 and ER40 | |
| Shank With Groove | Yes | |
| Manufacture | IGSTOOL | |
All TTS Tool Holder designed by customer provide drawing and samples, We don,t provide and designed any drawing
All straight shank tool holder can be used on lathe and milling machine
Ths shank has flat or without flat options, collet nut has round and hexagon nut, the shank length can be up to 200mm and
precision run out 0.005mm, used on the small hole, step cutting, and space milling
IGSTOOL built-in 2007,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er collet from er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision .We also provide er collet set ,drill collet,5c collet set and r8 collet set ,our er collet precision
match techniks collet and lyndex collets. otherwise, we accept OEM tool collet and router collet ,lathe collet chuck and 16c collet too.
