- BT40 GER Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT40 machines
- For ER40 ER32 ER25 ER20 ER16
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5″ to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M16x2
- Color Silver Coated: never rusty ever
BT40 GER Collet Chuck Tool Holders Round Nut
Description
BT40 GER Collet Chuck Tool Holders CNC Milling Tools
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
Specification
BT40 GER Collet Chuck Tool Holder |
||
|---|---|---|
| BT40 | Product NO. | ER40 ER32 ER25 ER20 ER16 eR11 and ER8 |
| Insulation material | Hardened Alloy Steel | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0001″ or 0.003mm | |
| Color | silver coated | |
| Standard Spindle | BT40 Taper | |
| Stop Screw | Threaded for internal stop screw included | |
| Manufacture | IGSTOOL | |
BT40 Taper Application Guide
BT40 Collet Holders Available
IGSTOOL built-in 2006,over 13+years production line include er collet,collet chuck ,cat40 tool holder ,cat40 collet holder ,collet holder ,shrink fit tool holder and slim fit collet chuck machine tools,we made er8 ,er16 ,er20 ,er32 ,er40 up to er50 ,collet chucks taper in cat30,cat40,cat50 ,bt30 ,bt40,bt50 and hsk63 iso20 iso30 etc .We made the spring collet precision up to 3um and er collet chuck up to 0.002mm run out precision. We also provide er collet set, drill collet,5c collet set and r8 collet set, our er collet precision match Techniks collet and lyndex collets. otherwise, we accept OEM tool collet and router collet, lathe collet chuck, and 16c collet too.
