- Double Ended Straight Shank Tool Holders
- Shank length: up to 8inches with Flat
- Shank diameter up to 32mm or 1.5″
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is from 10mm to 150mm
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
Double Ended Straight Shank Tool Holders Cylindrical Collet Holder
Description
Double Ended Straight Shank Tool Holders Collet Holders Flat
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holder in the high-performance
A balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
Double Ended Straight Shank Tool Holders |
||
|---|---|---|
| ER Collet | Shank Size available | 3/8,1/2,3/4, 1″ ,1.25″, 1.5″ ,/ 8 ,10 ,12 ,16 ,20 ,22,25,32mm |
| Shank length available | 1″ 2″ 4″ 6″ 8″ 25,50,60,70,100,110,150 with Flat | |
| Hardness | HRC 55 | |
| Run Out (TIR) | <0.0002″ or 0.005mm | |
| Color | Oxide black | |
| Type | Hexagon Nut/Mini Nut | |
| Balance | G2.5 25,000 rpm | |
| Manufacture | IGSTOOL | |
Double Ended Straight Shank Tool Holders Cylindrical Collet Holders
All straight shank tool holders can be used on lathe and milling machine
Ths shank has flat or without flat options, collet nut has round and hexagon nut, the shank length can be up to 200mm and
precision run out 0.005mm, used on the small hole, step cutting, and space milling
ER20 straight shank tool holder available
