- Custom Straight Shank Tool Holders
- Shank length: 1.38″
- Flange size:1.5“
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 – 56rc
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread: available
- Color: Oxide black
Custom Straight Shank Tool Holders Cylindrical EndMill Holders TTS Set Screw Holder
Description
Custom Straight Shank Tool Holders Cylindrical EndMill Holders TTS Tool Holder
The IGSTOOL Tool holder is balanced to G2.5 25,000 RPM on Germany HAIMER Tool Dynamic Balancing System,
Each Tool Holder with QC report card. 100% guarantee of each tool holders in the high-performance
Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing,
minimize vibration and maximize the cutting tool’s life a long time and greatly improve surface finish
We accept Custom OEM Order
TTS Set Screw Holder |
||
|---|---|---|
| End Mill | Shank Size available | 3/4″ |
| Shank length available | 1.38″ | |
| Flange Size | 1.5″ | |
| Run Out (TIR) | <0.0002″ or 0.005mm | |
| Color | Oxide black | |
| For ER Collet | ER11 ER20 ER25 eR32 and ER40 | |
| Shank With Flat | No | |
| Manufacture | IGSTOOL | |
All straight shank tool holders can be used on lathe and milling machine
The shank has flat or without flat options, collet nut has round and hexagon nut, the shank length can be up to 200mm and
precision run out 0.005mm, used on the small hole, step cutting, and space milling
iGSTOOL built-in 2007, over 13+years production line include er collet, collet chuck,cat40 tool holder,cat40 collet holder, collet holder, shrink fit tool holder and slim fit collet chuck machine tools, we made er collet from er8,er16,er20,er32,er40 up to er50, collet chucks taper in cat30,cat40,cat50,bt30,bt40,bt50 and hsk63 iso20 iso30, etc.We made the spring collet
precision up to 3um and er collet chuck up to 0.002mm run out precision. We also provide er collet set, drill collet,5c collet set and r8 collet set, our er collet precision
match techniks collet and lyndex collets. otherwise, we accept OEM tool collet and router collet, lathe collet chuck and 16c collet too.
