Skip to content
-
- BT40 shrink fit tool holder
- Works on all BT40 machines
- From 3mm to 25mm
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 10 inches)
- Concentricity is less than .0001 at collet face
- Rear thread for pull stud is M16x2
- Color Silver Coated: never rusty ever
-
- BT40 Side Lock End Mill Tool Holder
- Works on all BT40 machines
- From 3mm to 32mm
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M16x2
- Color: oxide black
-
- BT40 SK Collet Chuck Tool Holders CNC Milling Tools
- Works on all BT40 machines
- For SK25 SK20 SK16 Sk10 and SK6
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 8 inches)
- Concentricity is less than .0001 at collet face
- Round Collet nut is included
- Rear thread for pull stud is M16x2
- Color: Silver Coated
-
- BT40 Testing Bar Gage Tool TIR 2μm Gage length 12"
- Works on all CAT 40 machines
- Gage length: 12 inches
- Gage diameter: 2 inches
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 15,000 RPMs
- Rear thread for pull stud is M16x2
- Color: Silver
-
- BT40 Probe gauge tool holder
- Works on all BT40 machines
- All critical surface grinding ground
- Gage diameter: 1.75"
- Made from stainless steel hardened to 54 - 56rc
- The rear thread for the pull stud is M16x2.0
-
- BT40 Tool Probe Calibrator Calibration Gage Tool
- Works on all BT 40 machines
- Gage length: 4inches
- Gage diameter: 0.5 inches
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- The rear thread for the pull stud is M16x2.0
- Color: Oxide Black
-
- CAT40 Alignment Tool Gage Arbor
- Works on all CAT 40 machines
- Gage length: 2.5
- Gage pin: 1 inch
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Rear thread for pull stud is 5/8-11
- Color: Oxide Black
-
- CAT40 Blank Tool Holder 12" Long Gage Tool
- Works on all CAT 40 machines
- Gage length: 12 inches
- Gage diameter: 2 inches
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 15,000 RPMs
- Rear thread for pull stud is 5/8-11
- Color: Silver
-
- CAT40 CAT50 Tightening Fixture
- Holds all standard CAT40 CAT50 tool holder
- Made from alloy steel hardened to 54 - 56rc
- Made in aluminum and alloy steel
- The internal taper is aluminum to avoid scratching your tool holder taper
- Great fixture for tightening your tool holders and pull stud
-
- CAT40 End Mill Tool Holders CNC Milling Tools
- Works on all CAT 40 machines
- For 1/8,1/4,3/8,1/2,3/4,1" 1.5" and 2"
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 2" to 10 inches)
- Concentricity is less than .0001 at collet face
- Collet nut is included
- Rear thread for pull stud is 5/8-11
- Color Silver Coated: never rusty ever
-
- CAT40 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all CAT 40 machines
- For ER40 ER32 ER25 ER20 ER16 ER11 ER8 available
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 10 inches)
- Concentricity is less than .0001 at collet face
- Collet nut is included
- Rear thread for pull stud is 5/8-11
- Color Silver Coated : never rusty ever
-
- CAT40 ER Collet Chuck Tool Holders CNC Milling Tools
- Works on all CAT 40 machines
- For ER40 ER32 ER25 ER20 ER16 ER11 ER8 available
- Threaded for stop screw ( included)
- All critical surfaces precision ground
- Made from alloy steel hardened to 54 - 56rc
- Balanced to G2.5 at 25,000 RPMs
- Gage length is ( from 0.5" to 10 inches)
- Concentricity is less than .0001 at collet face
- Collet nut is included
- Rear thread for pull stud is 5/8-11
- Color Silver Coated : never rusty ever
